Reply To: Heating on a star twins

Hi Bruce

The ducting initially turns 90 degrees downwards from the unit, then turns 90deg' again to face the bows. It then passes through two bulkheads . the second bulkhead being the one which supports the right had rotating spindle of the chart table when facing the chart table, it appears out just below the bottom of the table when in the closed position. Approx' 18inches of the floor, at this point I made a box mounting to enable the ducting end piece to be mounted at 45deg' facing inwards . The actual ducting end unit itself allows you to rotate the face upwards to direct the air into the seating area.
(I bet thats as clear as mud)
I not sure if this the best position for the outlet but a little bit of trial and error needs to be applied.

regards Dave r