marine cooker

All Forums › General Discussion › marine cooker

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 3rd January 2018 at 10:15 am #12693

      Can anyone tell me the dimensions of the space for installing a cooker on a heavenly twins 4.  I need to buy a new one but cabby get to my boat to measure up. recommendations on a model would be mucheap valued

      6th January 2018 at 9:25 pm #12706

        Hi Pat, If you look at some online suppliers they will have dimensions within the product details. I can measure my one when I’m back at the yard but I think they do vary depending on make, number of rings etc. You should think about using a heat proof skin on the sides of the units either side, as you have to fit quite snug for gimbals. Regards Dave

        7th January 2018 at 8:45 am #12707
          • Thanks for that. My problem is that I need to know the dimensions of the space available on my HTC 1V. My boat is in Greece and I am UK so a bit tricky to get aboard and measure up. If anyone visiting their boat could get me the measurements that would be great.
          7th January 2018 at 2:40 pm #12716

            Hi David, if you could just measure the width, height and depth of the space provided for a cooker, I’ll be a able search for something suitable on line. I assume the space will be the same for all HT 4s

            Thanks for responding

            Patrick

            7th January 2018 at 6:24 pm #12718

              Hi Pat,  I will be able to get measurements tomorrow, but cannot be sure that all spaces left for the oven will be the same. To be honest I would not risk it and would wait for an accurate measurement. Dave

            • Author
              Posts
            Viewing 5 posts - 1 through 5 (of 5 total)
            • The forum ‘General Discussion’ is closed to new topics and replies.

            Comments are closed.