Perkins Perama M20 pipe to heat exchanger required

All Forums › To Buy › Perkins Perama M20 pipe to heat exchanger required

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 13th November 2015 at 5:09 pm #11221

      I need a new rubber pipe that is approximately 4 inches long and connects from the water pump to the heat exchanger on my Perkins Perama M20 diesel engine. Apparently they are no longer in stock. If anyone has one spare or has any advice on what to replace it with I would be pleased to buy it.
      Alastair

      17th November 2015 at 4:21 pm #12104

        Try scouring http://www.volvopentashop.com/ for spares but…

        Have a look at the various engines and figure out which pipe is the same as yours.

        One of these part numbers may be right

        3580248
        3580527
        3580329
        861927

        Think those are the correct numbers

        Even easier open the “Heat exchanger” diagrams at

        http://www.volvopentashop.com/Volspec/en-GB/Details/PentaPartsCatalog/7746410_26?path=MarineDieselEngines%2F7746410%2F7746410_26

        19th November 2015 at 7:59 pm #12105

          Thanks for the information and links Dave. There isn't enough detail on the heat exchanger diagrams but I'll give them a phone. I wasn't aware that Volvo engines were so similar to the Perkins Perama. Certainly the heat exchangers are very similar.
          Cheers
          Alastair

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • The forum ‘To Buy’ is closed to new topics and replies.

        Comments are closed.